REPELIN™ PVC - GALLON 128 OZ
● Item: 58-5215502
● Gallon 128 FL OZ
Inflatable Water Sport Equipment
Fouling Release Coat
Apply below the waterline, over POLY GUARD™, to reduce attachment of marine fouling and to make clean up easier.
Eco Friendly: No Biocides
REPELIN™ is a super slippery polymeric coating that makes it difficult for marine life to attach. Slime will form on the surface but this can easily be removed by wiping with a sponge. If slime is kept off, marine life will not attach. Apply over POLY GUARD™ on all surfaces below the waterline. For optimum performance, re-apply every 3 to 6 months.
Clean the surface with MAXI CLEAN™, rinse well and allow to dry. This includes new equipment in order to remove manufacturing pollutants. Protect surface with two coats of POLY GUARD™. Apply REPELIN™ to one section at a time with a damp sponge, rubbing in a circular motion until well covered and spread out thinly. When haze forms, wipe away with a terry towel or micro fiber cloth. Repeat after 24 hours. Allow 48 hours before launching equipment.
Do not apply REPELIN™ directly to fabric as it could impede patchability.
If necessary, clean all marine growth first with FOUL OFF™. If surface has deteriorated, restore first with SPEED CLEAN™.
SHAKE WELL BEFORE USING
DO NOT FREEZE
KEEP OUT OF REACH OF CHILDREN
Contains Petroleum Distillates. In Case of eye contact flush well with water.
If swallowed, DO NOT induce vomiting. Call a Poison Control Center or doctor immediately.