Aquaglide’s Commercial Disc System Aquaglide Diamond Disc range from very aggressive (30 Grit) for heavy stock removal to very fine (120 Grit) for honing or polishing. Water use will prolong life of each disc while eliminating dust in the work area. Special snatch & grab backing material only locks to our newly designed backer pads. Excellent disc placement with no movement from backer pad. Allows clear view of surface area being processed: Note do not exceed 5000 RPM's.
Diamond Disc Selection Guides Before and After Pictures
Disc Diamond Pattern Shown Below
|
Aqua Hone Disc: Works great on new or old surfaces that require a honed or polished finish. 7" Diamond Disc with 7/8" with hole in center for water feed. NOTE: DO NOT USE EXCESSIVE DOWN PRESSURE ON PADS THIS WILL CAUSE LOSS OF DIAMOND DOTS ON THE SEMI-FLEXIBLE DIAMOND DISC. |
